WxSC800
WxSC800
LTE Cat1 Smart IoT and RTU 2-in-1 Terminal
Related Products
Product . Interf. Descriptions |
WxSC800 11MPI+RS485+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx00,PSB-BD01,&Enclosure)
WxSC801 RS485+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal (Inc.WxSC8xx,PSM-xx01,PSB-BD01,&Enclosure)
WxSC802 0-20mA*1+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx02,PSB-BD01,&Enclosure)
WxSC803 0-20mA*4+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx03,PSB-BD01,&Enclosure)
WxSC804 0-3.3V*2+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx04,PSB-BD01,&Enclosure)
WxSC805 0-3.3V*4+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx05,PSB-BD01,&Enclosure)
WxSC806 0-10V*2+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx06,PSB-BD01,&Enclosure)
WxSC807 0-10V*4+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx07,PSB-BD01,&Enclosure)
WxSC808 PT100*1+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx08,PSB-BD01,&Enclosure)
WxSC809 PT100*5+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx09,PSB-BD01,&Enclosure)
WxSC80A Switch*1+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0A,PSB-BD01,&Enclosure)
WxSC80B Switch*5+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0B,PSB-BD01,&Enclosure)
WxSC80C Unibus*1+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0C,PSB-BD01,&Enclosure)
WxSC80D Unibus*18+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0D,PSB-BD01,&Enclosure)
WxSC80E IIC*1+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0E,PSB-BD01,&Enclosure)
WxSC80F SPI*1+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0F,PSB-BD01,&Enclosure)
WxSC80G Uart*2+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0G,PSB-BD01,&Enclosure)
WxSC80H Uart*3+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0H,PSB-BD01,&Enclosure)
WxSC80J Uart*1+RS485+OD*2+PWR*2 LTECat1 Smart IoT and RTU 2-in-1 Terminal(Inc.WxSC8xx,PSM-xx0J,PSB-BD01,&Enclosure)
WxSC850 Ai/Ao/Di/Pi/Ro/IIC/SPI/Ci + RS232/485/Ro/RJ45 LTE Cat1 Smart RTU
Product Highlights
v Interfaces supported:
o MPI:(AIN(0-20mA)*2, PT100*1, VIN(0-10V/0-3.3V)*2, Switch*1 ,Unibus*1, IIC *1，SPI*1, Uart(3.3V TTL)*2), RS485*1
o RTU interfaces
§ OD*2 output for external devices controlling
§ PWR*2 output for external devices/sensors power supply or customization usage
v 2-in-1 DC(5V/12V)+Battery(3.6V Li-SOCl2 ER34615H/M) Power Supply, DC in priority
v Up to 8 working simultaneously including sensors and controllers; Customization needed if more than 8 working at the same time
v Built-in sensor options including:
o PSS-403011 IIC Temperature and Humidity Sensor (Indoor)
o PSS-403012 RS485 Temperature and Humidity Sensor (Indoor)
o PSS-403013 IIC Temperature and Humidity Sensor (IP67,Outdoor)
o PSS-403014 RS485 Temperature and Humidity Sensor (IP67,Outdoor)
o PSS-403015 IIC Temperature and Humidity Sensors (Indoor)
o PSS-403016 RS485 Temperature and Humidity Sensors (Indoor)
o PSS-403017 IIC Temperature and Humidity Sensors (IP67,Outdoor)
o PSS-403018 RS485 Temperature and Humidity Sensors (IP67,Outdoor)
o PSS-403019 IIC Temperature and Humidity Sensors (Indoor)
o PSS-40301A RS485 Temperature and Humidity Sensors (Indoor)
o PSS-40301B IIC Temperature and Humidity Sensors (IP67,Outdoor)
o PSS-40301C RS485 Temperature and Humidity Sensors (IP67,Outdoor)
o PSS-33B011 RS485 illumination Sensor(Indoor)
o PSS-423011 Uart AQI(PM2.5/10, SO2,NO2, O3, CO,Temp,Humidity) PPM Level Sensors
o PSS-423031 Uart IAQ(PM2.5/10, CO2, HCHO, Temp,Humidity) Sensors
o PSS-423041 Uart IAQ(PM2.5/10, CO2, TVOC, Temp,Humidity) Sensors
o PSS-423051 Uart IAQ(PM2.5/10, CO2, HCHO, TVOC,Temp,Humidity)Sensors
o PSS-318711 Uart GPS/Beidou Positioning Sensor
o PSS-318712 RS485 GPS/Beidou Positioning Sensor
o PSS-319311 0-3.3V Tilt / Inclination Sensor (SHM- Structure Health Monitoring)
o PSS-333051 0-3.3V PIR Sensor (3-4 Meters)
o PSS-333052 0-3.3V PIR Sensor (up to 20 Meters)
o PSS-334061 0-3.3V UV Sensor (Range:0-15 grade, outdoor)
o PSS-355051 Switch Uni-Call Button&Controller
o PSS-362011 Uart Sound/Noise Sensor (30~130dB range, Indoor)
o All Gas Sensors with Product No. PSS-21xxxx
v Support 1-8 enclosure externally connected sensors
o All enclosure external PSS sensors w/o separate power supply
v RTU OD&PWR(PWM) output control inerfaces
o OD output control interface for controlling external devices such as electric relay,AC contactor, beeper, draught fan, lamps and lantern etc.
o PWR*2 output, one default for external devices/sensors power supply voltage output, one with 3.3V voltage; or customization usage,such as for PWM port
o PWR port signal can be used as PWM output to control stepper moter or lamp
o Sensor(s) data or OTA Command triggered OD/PWR controlling signal&interfaces
v Power supply options:
o PSB-BT01 WxS Terminal Battery Power (3.6VDC Output) (3.6V Li-SOCl2 ER34615H/M)
o PSB-BT02 WxS Terminal Battery Power Board (3/5/9/12VDC Output) (3.6V Li-SOCl2 ER34615H/M)
o PSB-DC01 WxS Terminal DC Power Board (Inc.PSP-DC012V)
o PSB-BD01 WxS Terminal Battery (3.6V Li-SOCl2 ER34615H/M)&DC Power Board(Inc.PSP-DC012V)
o Battery capacity ER34615H: 19000mAh/ER34615M: 13500mAh
v iEdge 4.0 terminal enclosure options
o ENC-102001 WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)
o ENC-102002 WxS Series 4.0 Poromeric Enclosure(φ145x90x59mm)
o ENC-102003 WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)
v Terminal and sensor parameters configurable with Configuration Tool running on PC
o LTE Cat1 Bands Supported and SW Configurable
o LTE Cat1 Uplink Transmission Cycle Configurable
o Sensor Parameters Configurable
o Sensor Data Report Cycle Configurable
v FOTA (Over The Air) firmware upgrade, including to upgrade loader and application images
v OTA (Over The Air) terminal running parameters supported including output signal
v Low power consumption, years of battery operational life with 3.6V Li-SOCl2 ER34615H/M Battery with various scenarios
v Integrated internal antenna, or optional external SMA/IPEX antenna
v LTE Cat1 Compliance
Specifications
Parameters | Value |
Smart Terminal | |
Interfaces | MPI Interfaces-Any Mixture of Following: MPI:(AIN(0-20mA) *2, PT100 *1, VIN(0-10V/0-3.3V) *2, Switch *1 ,Unibus*1, IIC *1，SPI*1, Uart(3.3V TTL)*2), RS485*1 Output Control: OD*2&PWR*2 |
Data Report | Cross-threshold report, plus periodic report (the threshold and the periodic report cycle are both user-configurable) |
Intensive data sampling and averaging | Support intensive data sampling and averaging to improve data accuracy |
Wireless | |
Regional Parameters | LTE-TDD:B34/B38/B39/B40/B41 LTE-FDD:B1/B3/B5/B8 |
Data | LTE-TDD： Up and down matching 2 8Mbps (DL) max/2Mbps (UL) max Up and down matching 1 6Mbps (DL) max/4Mbps (UL) max LTE-FDD: Max 10Mbps (DL)/Max 5Mbps (UL) |
Sensitivity | FDD B1: -99dBm (10M) FDD B3: -99dBm (10M) FDD B5: -99dBm (10M) FDD B8: -99dBm (10M) TDD B34: -100dBm (10M) TDD B38: -100dBm (10M) TDD B39: -100dBm (10M) TDD B40: -100dBm (10M) TDD B41: -100dBm (10M) |
Bandwidth | 1.4/3/5/10/15/20MHz |
Output power | LTE-TDD: Class3 (23dBm+1/- 3dB) LTE-FDD: Class3(23dBm+-2dB) |
Power consumption | 1uA @ power off 0.6mA @ Sleep, typical |
Interface | 1 USB 2.0 high-speed interface (up to 480Mbps); Dual 1.8V/3.0V (U) SIM card interface 2 NETLIGHT interfaces (NET_STATUS and STATUS) 1 channel digital I2S interface, supporting external codec 3 UART interfaces (main serial port, universal serial port, debugging serial port) 1 SPI LCD interface 1 SPI Camera interface PWRKEY (valid at low level) 1 channel ADC interface |
Antenna | Integrated internal antenna or external 1/2 wavelength whip antenna (SMA) |
Mechanical | |
Dimension | 3 Enclosure options with different size WxS Series 4.0 Enclosure(φ145x90x55mm, IP67) WxS Series 4.0 Poromeric Enclosure(φ145x90x59mm) WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm) |
IP rating | IP65&IP67 |
Operating Temperature | -40C to +85C |
Total Weight | 150 g |
Electrical | |
Supply Voltage | 3.6VDC |
Power Type | Replaceable 1 ER34615H/M 3.6V Li-SOCI2 Battery (H/M); DC 4.5V – 12V optional |
Configuration Tool
v iEdge4.0 WxS IoT Terminal products can be configured with PolySuite software-visual based Configuration Tool or CLI interface command or OTA via IoT platform, such as PolySuite PaaS platform iView.
v Download linkhttps://ota.polysense.online/wincc/ConfigurationTool.rar
Installation Guide
v Below diagram shows the general installation guide for WxS8800, it can be installed on any flat and solid surface:
v Below is the recommendation of the self-tapping screw and its sizes:
Product Images
v WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)
v WxS Series 4.0 Poromeric Enclosure(φ145x90x59mm)
v WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)
APP download
About Polysense
News & Events
Contact us
Add.: 3000 Scott Blvd, Santa Clara, CA 95054
Email: info@polysense.net
