WxS7800-333031
WiFi Fire smoke Smart Sensor & RTU 2-in-1 Terminal
Product Highlights
vWiFi Fire smoke Smart Sensor & RTU 2-in-1 Terminal
v2-in-1 smart sensor(s) and RTU terminal product
vOptional DC 12V power supply
vOptional Battery power supply (ER34615H 19,000mAh/ER34615M 13,500mAh)
vFire smoke sensor, trigger alarm, built-in buzzer
vUp to 8 working simultaneously including sensors and controllers; Customization needed if more than 8 working at the same time
vRTU controlling signal and interfaces OD/PWR triggered by sensor(s) data or OTA command for solenoid valve or other devices
vTerminal and sensor parameters configurable with Configuration Tool running on PC
o WiFi Global Bands Supported and SW Configurable
o WiFi Uplink Transmission Cycle Configurable
o Sensor Parameters Configurable
o Sensor Data Report Cycle Configurable
vFOTA (Over The Air) firmware upgrade, including to upgrade loader and application images
vOTA (Over The Air) terminal running parameters supported
vIntegrated internal antenna, or optional external SMA/IPEX antenna
vOptional (Public/Private) IoT cloud platform PolySuite iView
vWiFi Compliance
Specifications
Parameters | Value |
Smart Terminal |
Data Report | Cross-threshold report, plus periodic report (the threshold and the periodic report cycle are both user-configurable) |
Wireless |
Wireless standards | 802.11 b/g/n |
output power | +20 dBm in 802.11b mode |
frequency range | 2.4GHz-2.5GHz (2400M-2483.5M) |
Data connection | UART/HSPI/I2C/I2S/Ir Remote Contorl |
Wireless network mode | station/softAP/SoftAP+station |
Network Protocol | IPv4, TCP/UDP/HTTP/FTP |
Power | Power consumption in standby mode is less than 1.0 mW (DTIM3) |
Antenna | Integrated internal antenna or external 1/2 wavelength whip antenna (SMA) |
Mechanical |
Dimension | Diameter 128mm * height 50mm |
Operating Temperature | -40C to +85C |
IP protection | IP55 |
Electrical |
Supply Voltage | 12VDC |
Power Type | Battery power supply ER34615H/ER34615M or DC12V |
Products includes following parts:
vPST-333031 Fire smoke sensor (IR) & RTU 2-in-1 Smart Terminal
vWxS78xx WxS Terminal WiFi Communications Board
Configuration Tool
viEdge4.0 WxS IoT Terminal products can be configured with PolySuite software-visual based Configuration Tool or CLI interface command or OTA via IoT platform, such as PolySuite PaaS platform iView.
vDownload link https://ota.polysense.online/wincc/ConfigurationTool.rar
Product Image
