WxS8800-21E0J3
LoRaWAN NDIR CO2 Gas Smart Sensor & RTU 2-in-1 Terminal
Product Highlights
v LoRaWAN NDIR CO2 Gas Smart Sensor & RTU 2-in-1 Terminal
v 2-in-1 smart sensor(s) and RTU terminal product
v Optional DC 5V power supply
v Optional Battery power supply (ER34615H 19,000mAh/ER34615M 13,500mAh)
v CO2 concentration can be monitored (400-10,000ppm), with high sensitivity, high resolution and fast response time
v Expandable with additional Polysense PSS sensors
v Expandable with 2 of 14 types PSS gas sensors with aluminum Sleeve enclosure
v Up to 8 working simultaneously including sensors and controllers; Customization needed if more than 8 working at the same time
v RTU controlling signal and interfaces OD/PWR triggered by sensor(s) data or OTA command for solenoid valve or other devices
v Optional (Public/Private) IoT cloud platform PolySuite iView and LoRaWAN network iServer
v LoRaWAN Compliance
Products includes following parts:
v WxS8800 LoRa Smart IoT and RTU 2-in-1 Terminal
v ENC-102003 WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)
v PSS-21E0J3 NDIR CO2 Gas Sensor (Range: 400-10,000PPM,Resolution: 1PPM)
Configuration Tool
v iEdge4.0 WxS IoT Terminal products can be configured with PolySuite software-visual based Configuration Tool or CLI interface command or OTA via IoT platform, such as PolySuite PaaS platform iView.
v Download link https://ota.polysense.online/wincc/ConfigurationTool.rar
Product Image
v The shell is WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm), as shown in the figure below
v The sensor is externally connected. See the following document PSS-21E0J3 for the sensor picture
WxS8800
LoRaWAN Smart IoT and RTU 2-in-1 Terminal
Related Products
Product . Interf. Descriptions |
WxS8800 11MPI+RS485+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx00, PSB-BD01, & Enclosure)
WxS8801 RS485+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx01, PSB-BD01, & Enclosure)
WxS8802 0-20mA*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx02, PSB-BD01, & Enclosure)
WxS8803 0-20mA*4+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx03, PSB-BD01, & Enclosure)
WxS8804 0-3.3V*2+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx04, PSB-BD01, & Enclosure)
WxS8805 0-3.3V*4+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx05, PSB-BD01, & Enclosure)
WxS8806 0-10V*2+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx06, PSB-BD01, & Enclosure)
WxS8807 0-10V*4+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx07, PSB-BD01, & Enclosure)
WxS8808 PT100*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx08, PSB-BD01, & Enclosure)
WxS8809 PT100*5+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx09, PSB-BD01, & Enclosure)
WxS880A Switch*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0A, PSB-BD01, & Enclosure)
WxS880B Switch*5+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0B, PSB-BD01, & Enclosure)
WxS880C Unibus*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0C, PSB-BD01, & Enclosure)
WxS880D Unibus*18+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0D, PSB-BD01, & Enclosure)
WxS880E IIC*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0E, PSB-BD01, & Enclosure)
WxS880F SPI*1+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0F, PSB-BD01, & Enclosure)
WxS880G Uart*2+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0G, PSB-BD01, & Enclosure)
WxS880H Uart*3+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0H, PSB-BD01, & Enclosure)
WxS880J Uart*1+RS485+OD*2+PWR*2 LoRa Smart IoT and RTU 2-in-1 Terminal (Inc. WxS88xx, PSM-xx0J, PSB-BD01, & Enclosure)
WxS8850 Ai/Ao/Di/Pi/Ro/IIC/SPI/Ci + RS232/485/Ro/RJ45 LoRaWAN Smart RTU
Product Highlights
v Interfaces supported:
o MPI:(AIN(0-20mA)*2, PT100*1, VIN(0-10V/0-3.3V)*2, Switch*1 ,Unibus*1, IIC *1，SPI*1, Uart(3.3V TTL)*2), RS485*1
o RTU interfaces
§ OD*2 output for external devices controlling
§ PWR*2 output for external devices/sensors power supply or customization usage
v 2-in-1 DC(5V/12V)+Battery(3.6V Li-SOCl2 ER34615H/M) Power Supply, DC in priority
v Up to 8 working simultaneously including sensors and controllers; Customization needed if more than 8 working at the same time
v Built-in sensor options including:
o PSS-403011 IIC Temperature and Humidity Sensor (Indoor)
o PSS-403012 RS485 Temperature and Humidity Sensor (Indoor)
o PSS-403013 IIC Temperature and Humidity Sensor (IP67,Outdoor)
o PSS-403014 RS485 Temperature and Humidity Sensor (IP67,Outdoor)
o PSS-403021 IIC Temperature+Humidity+Barometric Pressure Sensor(Indoor)
o PSS-403022 RS485 Temperature+Humidity+Barometric Pressure Sensor(Indoor)
o PSS-403031 IIC Temperature+Humidity+Barometric Pressure+Light Sensor(Indoor)
o PSS-403032 RS485 Temperature+Humidity+Barometric Pressure+Light Sensor(Indoor)
o PSS-423011 Uart AQI(PM2.5/10, SO2,NO2, O3, CO,Temp,Humidity) PPM Level Sensors
o PSS-423031 Uart IAQ(PM2.5/10, CO2, HCHO, Temp,Humidity) Sensors
o PSS-423041 Uart IAQ(PM2.5/10, CO2, TVOC, Temp,Humidity) Sensors
o PSS-423051 Uart IAQ(PM2.5/10, CO2, HCHO, TVOC,Temp,Humidity)Sensors
o PSS-318711 Uart GPS/Beidou Positioning Sensor
o PSS-318712 RS485 GPS/Beidou Positioning Sensor
o PSS-319311 0-3.3V Tilt / Inclination Sensor (SHM- Structure Health Monitoring)
o PSS-333051 0-3.3V PIR Sensor (3-4 Meters)
o PSS-333052 0-3.3V PIR Sensor (up to 20 Meters)
o PSS-334061 0-3.3V UV Sensor (Range:0-15 grade, outdoor)
o PSS-355051 Switch Uni-Call Button & Controller
o PSS-362011 Uart Sound/Noise Sensor (30~130dB range, Indoor)
o All Gas Sensors with Product No. PSS-21xxxx
v Support 1-8 enclosure externally connected sensors
o All enclosure external PSS sensors w/o separate power supply
v RTU OD & PWR(PWM) output control interfaces
o OD output control interface for controlling external devices such as electric relay,AC contactor, beeper, draught fan, lamps and lantern etc.
o PWR*2 output, one default for external devices/sensors power supply voltage output, one with 3.3V voltage; or customization usage,such as for PWM port
o PWR port signal can be used as PWM output to control stepper moter or lamp
o Sensor(s) data or OTA Command triggered OD/PWR controlling signal & interfaces
v Power supply options:
o PSB-BT01 WxS Terminal Battery Power (3.6VDC Output) (3.6V Li-SOCl2 ER34615H/M)
o PSB-BT02 WxS Terminal Battery Power Board (3/5/9/12VDC Output) (3.6V Li-SOCl2 ER34615H/M)
o PSB-DC01 WxS Terminal DC Power Board (Inc. PSP-DC012V)
o PSB-BD01 WxS Terminal Battery (3.6V Li-SOCl2 ER34615H/M) & DC Power Board(Inc. PSP-DC012V)
o Battery capacity ER34615H: 19000mAh/ER34615M: 13500mAh
v iEdge 4.0 terminal enclosure options
o ENC-102001 WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)
o ENC-102002 WxS Series 4.0 Poromeric Enclosure(φ145x90x59mm)
o ENC-102003 WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)
v Terminal and sensor parameters configurable with Configuration Tool running on PC
o LoRaWAN ISM Global Bands Supported and SW Configurable
o LORaWAN Uplink Transmission Cycle Configurable
o Sensor Parameters Configurable
o Sessor Data Report Cycle Configurable
v FOTA (Over The Air) firmware upgrade, including to upgrade loader and application images
v OTA (Over The Air) terminal running parameters supported including output signal
v Low power consumption, years of battery operational life with 3.6V Li-SOCl2 ER34615H/M Battery with various scenarios
v Integrated internal antenna, or optional external SMA/IPEX antenna
v The transmission reaches 5km in NLoS (non-line of sight) and 18km in LoS (line of sight) environment
v LoRaWAN Compliance
Specifications
Parameters | Value |
Smart Terminal | |
Interfaces | MPI Interfaces-Any Mixture of Following: MPI:(AIN(0-20mA) *2, PT100 *1, VIN(0-10V/0-3.3V) *2, Switch *1 ,Unibus*1, IIC *1，SPI*1, Uart(3.3V TTL)*2), RS485*1 Output Control: OD*2 & PWR*2 |
Data Report | Cross-threshold report, plus periodic report (the threshold and the periodic report cycle are both user-configurable) |
Intensive data sampling and averaging | Support intensive data sampling and averaging to improve data accuracy |
Wireless | |
ISM Regional Parameters | AS923 (AS923-1, AS923-2, AS923-3, AS923-4) AU915 CN470 CN779 EU433 EU868 IN865 KR920 RU864 US915 |
Maximum Link Budget | 168dB |
Distance | Up to 5km in NLOS; up to 18km in LOS |
Antenna | Integrated internal antenna or external 1/2 wavelength whip antenna (SMA) |
Mechanical | |
Dimension | 3 Enclosure options with different size WxS Series 4.0 Enclosure(φ145x90x55mm, IP67) WxS Series 4.0 Poromeric Enclosure(φ145x90x59mm) WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm) |
IP rating | IP65 & IP67 |
Operating Temperature | -40C to +85C |
Total Weight | 150 g |
Electrical | |
Supply Voltage | 3.6VDC |
Power Type | Replaceable 1 ER34615H/M 3.6V Li-SOCI2 Battery (H/M); DC 4.5V – 12V optional |
Compliance/Certification | |
| LoRaWAN 1.0.2 |
| FCC(America): 2AO7W-WXS8000, IC(Canada): 23701-WXS8000 ROHS(European Union): R2BJ180927F0664E
|
Configuration Tool
v iEdge4.0 WxS IoT Terminal products can be configured with PolySuite software-visual based Configuration Tool or CLI interface command or OTA via IoT platform, such as PolySuite PaaS platform iView.
v Download link https://ota.polysense.online/wincc/ConfigurationTool.rar
Installation Guide
v Below diagram shows the general installation guide for WxS8800, it can be installed on any flat and solid surface:
v Below is the recommendation of the self-tapping screw and its sizes:
Product Images
v WxS Series 4.0 Enclosure(φ145x90x55mm, IP67)
v WxS Series 4.0 Poromeric Enclosure(φ145x90x59mm)
v WxS Series 4.0 High Poromeric Enclosure(φ145x90x70mm)
PSS-21E0J3
CO2 Gas Sensor
Related Products
Product No. Interf. Descriptions |
PSS-21E0J1 Uart NDIR CO2 Gas Sensor (Range:400-2,000PPM, Resolution:1PPM)
PSS-21E0J2 Uart NDIR CO2 Gas Sensor (Range:400-5,000PPM, Resolution:1PPM)
PSS-21E0J3 Uart NDIR CO2 Gas Sensor (Range:400-10,000PPM, Resolution:1PPM)
PSS-21E0J4 Uart NDIR CO2 Gas Sensor (Range:0-2,000PPM, Resolution:1PPM)
PSS-21E0J5 Uart NDIR CO2 Gas Sensor (Range:0-5,000PPM, Resolution:1PPM)
PSS-21E0J6 Uart NDIR CO2 Gas Sensor (Range:0-10,000PPM, Resolution:1PPM)
Product introduction
The PSS-21E0J3 CO2 gas detection sensor is a general-purpose, small sensor with good selectivity, no oxygen dependence, and long life. It’s a high-performance sensor that combines mature infrared absorption gas detection technology with precise optical path design and sophisticated circuit design.
Detection principle
Non dispersive infrared (NDIR). The detection principle is a method based on the gas absorption theory. When the infrared light passes through the CO2 gas to be measured, these gas molecules absorb the infrared light of a specific wavelength. By measuring the intensity of the infrared light, the concentration of CO2 gas can be analyzed quickly and accurately.
Product features
v Detection item of intelligent sensor: CO2 gas;
v High sensitivity, high resolution and low power consumption
v Fast response time
v Excellent stability
v Temperature compensation, excellent linear output
v Provide UART, PWM waveform and other output modes
v Long service life up to 10 years
v Small size
Product parameters
Parameters | |
Monitoring gas | Carbon dioxide |
Chemical formula | CO2 |
Detection principle | Non dispersive infrared (NDIR) |
Detection range | 400~10,000ppm |
Accuracy | ± 50ppm or ± 5% reading value |
Preheating time | 1min |
Response time | T90 < 120s |
Interface level | 3.3V |
Average current | 20 mA (@ 5V supply) |
Peak current | 150 mA (@ 5V supply) |
Interface | |
Output signal | UART,PWM |
Warranty | |
Warranty period | 3 months (the gas sensor is a consumable, and its service life is related to the tested environmental concentration) |
Design life | 10 years |
Machinery | |
Size | 32.9mm×19.7mm×18.3mm |
Weight | 5g |
Operating temperature | -10℃～50℃ |
Operating humidity | 0～95%RH (no condensation) |
Power | |
Power | 4.0～5.5V DC |
Application
HVAC and refrigeration equipment, air quality monitoring equipment, fresh air system, air purification equipment, smart home, other consumer electronic equipment, etc.
Ordering Guide
v PSS-21E0J3 sensor is a sensor only, it needs to use with WxS terminals to combine to different product series; On the basis of the combination, multiple PSS sensors can be loaded through the Multiple Purpose Interface (MPI) of the intelligent IoT terminal.
v According to the specific scenario of use case, the enclosure and antenna of intelligent IoT terminal will be replaced to ensure the product quality and performance.
v PSS sensors can be integrated with the WxS terminal via the MPI interface to form different product series.
v Example of products are as follows:
o WxS7800-21E0J3 WiFi Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o WxS8800-21E0J3 LoRaWAN Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o WxS9800-21E0J3 NB-IoT (China) Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o WxS9900-21E0J3 NB-IoT (Global) Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o WxSC800-21E0J3 LTE Cat1 Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o WxSC900-21E0J3 LTE Cat1 w/GPS Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o WxSD800-21E0J3 LTE Cat4 Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
o CxS1800-21E0J3 Ethernet (RJ45) Series CO2 (400-10,000ppm) Smart Sensor & RTU 2-in-1 Terminal
APP download
About Polysense
News & Events
Contact us
Add.: 3000 Scott Blvd, Santa Clara, CA 95054
Email: info@polysense.net
